2 location - cold water installation – Stuart Turner CH 4-30 FL User Manual
Page 7
Advertising
- 7 -
Cont ...
2 LOCATION - COLD WATER INSTALLATION
2.25
The cold water supply: The supply must be AIR FREE and have a
DEDICATED CONNECTION to the tank which should be via a tank connector,
positioned at a slightly lower level (25 mm minimum) than the feed pipe to the hot
water
cylinder.
Fig. 2
Cold water
pump
Static inlet pressure
Min. 1 m
Max. 10 m
Static outlet pressure
12 m
Advertising
This manual is related to the following products: