Nexo GEO D - Manual (Page 23)

NEXO
154 allée des Erables - BP 50107 - 95950 ROISSY CDG CEDEX – France - Tel : +33 (1) 48-63-19-14
Fax : +33 (1) 48-63-24-61 - Email : [email protected] - Web :
http://www.nexo-sa.com -
S.A. au capital de 1.003.000 €. R.C
Bobigny 317 272 540 - SIRET 317 272 540 00038 APE 323Z
23/38
Mechanical Forces
- Allowed Loads on Bumper Rear Points S1: theoretical pressure/tensile force values confirmed
with destruction tests
- Applied Loads on Bumper Rear Points S1: configuration applied value (turns red if outside
limits)
- Allowed Loads on Bumper Front Points S2: theoretical pressure/tensile values confirmed with
destruction tests
- Applied Loads on Bumper Front Points S2: configuration applied value (turns red if outside
limits)
- Allowed Moment on Extension Bar (closed cross-section): theoretical maximum moment force
before bending, confirmed with destruction tests
- Applied Moment on Extension Bar (closed cross-section): configuration applied value (turns red
outside above limits)
- Allowed Moment on Link Bar: theoretical maximum moment force before bending, confirmed
with destruction tests
- Applied Moment on Link Bar: configuration applied value (turns red if outside limits)
- Allowed Load on CD12 flying rails: theoretical tensile force values
- Applied Load on CD12 flying rails: configuration applied values (turns red if outside limits)
- Wind force applied on cluster:
Rear or Front force applied when wind is present (Beaufort Scale = 8)
- Wind Offset Angle: Vertical Cluster rotation related to wind forces
Angle Sequence
- Delta: Inter Cabinets Angle Sequence
- Sum: Cumulative Angle Sequence (which takes wind effect into account)