Nexo GEO D User Manual
Page 39
NEXO
154 allée des Erables - BP 50107 - 95950 ROISSY CDG CEDEX – France - Tel : +33 (1) 48-63-19-14
Fax : +33 (1) 48-63-24-61 - Email :
- Web :
http://www.nexo-sa.com
-
S.A. au capital de 1.003.000 €. R.C
Bobigny 317 272 540 - SIRET 317 272 540 00038 APE 323Z
39/38
Mechanical Forces
-
Allowed load on selected bumper rear rigging point R1: theoretical tensile force value limit
-
Applied load on selected bumper rear rigging point R1: configuration applied value (turns red if
outside limits)
-
Allowed load on selected bumper front rigging point R2: theoretical tensile force value limit
-
Applied load on selected bumper front point rigging R2: configuration applied value (turns red if
outside limits)
-
Allowed pressure/tensile loads on T4805 rear point S1: theoretical pressure/tensile force value
limit
-
Applied min/max loads on T4805 rear point S1: configuration applied value (turns red if outside
limits)
-
Allowed pressure/tensile loads on T4805 front point S2: theoretical pressure/tensile force value
limit
-
Applied min/max loads on T4805 front point S2: configuration applied value (turns red if outside
limits)
-
Allowed pressure/tensile loads on T2815 rear point S1: theoretical pressure/tensile force value
limit
-
Applied min/max loads on T2815 rear point S1: configuration applied value (turns red if outside
limits)
-
Allowed pressure/tensile loads on T2815 front point S2: theoretical pressure/tensile force value
limit
-
Applied min/max loads on T2815 front point S2: configuration applied value (turns red if outside
limits)
-
Allowed load on Kelping Chain: theoretical tensile force value limit
-
Applied load on Kelping Chain: configuration applied value (turns red if outside limits)
-
Allowed Load on CD18 flying rails: theoretical tensile force values
-
Applied Load on CD18 flying rails: configuration applied values (turns red if outside limits)