Nexo GEO D - Manual (Page 30)

NEXO
154 allée des Erables - BP 50107 - 95950 ROISSY CDG CEDEX – France - Tel : +33 (1) 48-63-19-14
Fax : +33 (1) 48-63-24-61 - Email : [email protected] - Web :
http://www.nexo-sa.com -
S.A. au capital de 1.003.000 €. R.C
Bobigny 317 272 540 - SIRET 317 272 540 00038 APE 323Z
30/38
GEO D C
LUSTER
M
ECHANICAL
W
INDOW
Configuration Settings
Rigging top (case dependent, selectable)
1 Motor + EXBar1: GEO Bridle + GEOD bumper + Short Extension Bar + Wheel (only for GEO D
clusters)
2 Motors + EXBar1: GEOD bumper + Short Extension Bar (only for GEO D clusters)
2 Motors + EXBar2: GEOD bumper + Long Extension Bar (for GEO D and GEO SUB clusters)
Rigging bottom (case dependent, automatic)
Bottom-Bumper: GEOD bottom bumper (only for GEO D or combined GEO D / GEO SUB clusters)
Bumper + ExBar3: GEO SUB bottom bumper (only for GEO SUB clusters)
Chain lever hoist (selectable)
Leva 750: for up to 7.5 kN compression force
Leva 1500: from 7.5 kN to 15 kN compression force
NB: when 1 motor, LEVA750 is mandatory
Wind Beaufort 8
Corresponds to a 20.7 m/s wind. Options are:
- No Wind
- Wind from the back of the cluster
- Wind from the front of the cluster
Lateral wind is considered to have no influence on investigated forces.
Cluster Secured
Windforce distribution on cluster depends on how it is secured. Investigated cases are:
- No (cluster can rotate freely)
- Bottom: cluster secured at the bottom to avoid vertical rotation
NB: when 1 motor, securing bottom cluster is mandatory