Mammoth V-Cube Slim F-Series Sizes 180 to 350 - Manual (Page 3)

Mammoth V-Cube Slim IOM, MAMM-VCS-IOM-4FA (October 2013) 3
Nomenclature
F 830 S H F
Voltage Size (BTUH Cooling) Unit Type Temperature Range Design Series
F = 208-230/3/60 180 = 180,000 V = Vertical H = Standard Range
G = 460/3/60 240 = 240,000 L = Low Temperature
J = 380/3/50 280 = 280,000
K = 575/3/60 310 = 310,000
350 = 350,000
“Mammoth” is a registered trademark of Mammoth, Inc.
©Mammoth, Inc. All rights reserved throughout the world.
Illustrations cover the general appearance of Mammoth products at the time of publication. Mammoth, Inc. reserves the right to make
changes in design and construction at any time without notice.
Introduction
This manual provides guidelines for installation, startup,
operation and maintenance of your Mammoth V-Cube
Slim unit. Also provided with your unit are submittal docu-
ments that contain detailed specifications for your unit,
including drawings and wiring schematics. If your system
is equipped with EPiC™ controls from Mammoth, full
documentation on their use is also provided.
Installation, startup and operation of this unit must follow
accepted industry practices as described in the ASHRAE
Handbook, the National Electric Code, and other appli-
cable standards. Operate this equipment in accordance
with regulations of authorities having jurisdiction and
all applicable codes. Maintenance and service must be
performed by qualified personnel familiar with applicable
codes and regulations and experienced with this type of
equipment.
If you have additional questions about the operation or
maintenance of your Mammoth system, contact your
local Mammoth representative, or the Mammoth Service
department at (952) 358-6618 or info@mammoth-inc.
com. For assistance in locating your Mammoth repre-
sentative, call 952-358-6600 or send an email to info@
mammoth-inc.com. Or, go to www.mammoth-inc.com and
click on the Find a Rep link.