STI MBP1316 User Manual
STI Accessories for electrical
INSTALLATION OF STI-MBP BACKPLATE FOR METAL ENCLOSURE
All specifications and information shown were current as of publication and are subject to change without notice.
STIMBP JULY2013
Safety Technology International, Inc.
2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: [email protected]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: [email protected] • Web: www.sti-europe.com
INSTALLATION INSTRUCTIONS
1. Prior to installing the STI Metal Enclosure to the wall, knock out the
squares in the box with a screwdriver (see View A).
2. Snap the anchors into the now exposed squares.
NOTE: Some backplate models require 6 standoffs and screws.
3. Place the backplate into position.
4. Install screws, tighten until snug (do not over tighten).
VIEW A
VIEW B
VIEW C
18019 STANDOFF
#8 x 7/8” SCREW
18019 STANDOFF
#8 x 7/8” SCREW
18019 STANDOFF
#8 x 7/8” SCREW
Electronic warranty form at www.sti-usa.com/wc14