STI BIO-7505 - Manual

Safety Technology International, Inc.
2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: [email protected]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: [email protected] • Web: www.sti-europe.com
INSTALLATION OF BIO-7504 & BIO-7505 BIO PROTECTOR
All specifications and information shown were current as of publication, and are subject to change without notice.
STI-750405BIO IS JULY2007
CLEANING INSTRUCTIONS
1. Rinse cover with water to remove abrasive dust and dirt.
2. Wash with soap or mild detergent using a soft cloth. (DO NOT SCRUB.)
3. Rinse once more, then dry with a soft cloth or chamois.
4. To remove grease or wet paint, rub gently with a cloth wetted thoroughly
with naphtha, then wash and rinse. (DO NOT USE RAZOR BLADES.)
75009A NEOPRENE GASKET
FRONT OPENING
19018 ANCHOR
(7) PROVIDED
19025 #8 x 2 in. SCREW
(7) PROVIDED
750097C COVER - CLEAR
750097S COVER - SMOKE
INSTALLATION INSTRUCTIONS
1. Place the cover over the reader. Be sure the
keypad and print reader are accessible through
the front opening in cover.
2. Mark and drill 7 holes 3/16 in. (4.7mm).
3. Complete assembly as shown.
5.0 in.
(127mm)
GASKET
TOP VIEW
5.5 in.
(139mm)
FRONT VIEW
4.75 in.
(120mm)
8.75 in.
(222mm)
6.75 in.
(171mm)
Electronic warranty form at www.sti-usa.com/wc14