STI 9110 User Manual
Installation instructions, Cleaning instructions
Safety Technology International, Inc.
2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: [email protected]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: [email protected] • Web: www.sti-europe.com
INSTALLATION OF STI-9110 & STI-9110-S LOCKABLE THERMOSTAT COVER
All specifications and information shown were current as of publication, and are subject to change without notice.
9110 AUG2008
COVER AND
LOCK ASSEMBLY
STI-9110 (CLEAR)
STI-9110-S (SMOKE)
9110 FRAME
DRILL (4) HOLES .25"
EXISTING FLUSH
MOUNT THERMOSTAT
(6.3 mm) DIAMETER
FLUSH MOUNT
(STI 9110)
THE THREE (3) COVER TABS
MUST FACE UPWARD AS SHOWN
A➔
SEE
VIEW
A
19013 SCREW
#10 x 1/2 PHILIPS PAN HEAD
(4) PROVIDED
19033 ANCHOR
(4) PROVIDED
INSTALLATION INSTRUCTIONS
1. Do not remove thermostat. Prior to drilling anchor holes, cover thermostat with a damp cloth
to prevent dust from penetrating the sensor.
2. Center frame over existing thermostat. Mark and drill (4) anchor holes using a 1/4 in.
(6.3mm) drill bit. Insert the (4) anchors and complete installation as shown.
NOTE: The (3) tabs on the frame must face upward (View A).
3. Insert the (3) slots on the cover over tabs on the top surface of frame. Rotate cover downward
onto the frame and turn key to lock.
CLEANING INSTRUCTIONS
To clean cover, remove from wall. Rinse with water to remove abrasive dust and dirt. Wash with
soap or mild detergent using a soft cloth (DO NOT SCRUB). Rinse once more, then dry with a soft
cloth or chamois. To remove grease or wet paint, rub gently with a cloth wetted thoroughly with
naphtha. Then wash and rinse. DO NOT USE RAZOR BLADES.
5.3 in.
(135mm)
8.45 in.
(215mm)
9.5 in.
(241mm)
7.6 in.
(193mm)
3.75 in.
(95mm)
3.9 in.
(99mm)
PHILIPS PAN HEA
FOR SURFACE MOUNT
STI-9110 AND STI-3100
FOR ADEQUATE CLEARANCE
A 2 in. (50mm) DEEP SPACER
MUST BE USED
(ORDER STI-3100)
A
VIEW A
91101 COVER
9110 FRAME
FRAME TABS
5
Electronic warranty form at www.sti-usa.com/wc14