Brocade FastIron Ethernet Switch Administration Guide - Manual (Page 327)

Explanation A user has logged out of the USER EXEC mode of the CLI.
The user-name is the user name.
Message Level Informational
Message ACL ACL id added | deleted | modified from
console | telnet | ssh| snmp session
Explanation A user created, modified, deleted, or applied an ACL through an SNMP,
console, SSH, or Telnet session.
Message Level Informational
Message Bridge is new root, vlan vlan-id , root ID root-
id
Explanation A Spanning Tree Protocol (STP) topology change has occurred, resulting
in the Brocade device becoming the root bridge.
The vlan-id is the ID of the VLAN in which the STP topology change
occurred.
The root-id is the STP bridge root ID.
Message Level Informational
Message Bridge root changed, vlan vlan-id , new root ID
string , root interface portnum
Explanation A Spanning Tree Protocol (STP) topology change has occurred.
The vlan-id is the ID of the VLAN in which the STP topology change
occurred.
The root-id is the STP bridge root ID.
The portnum is the number of the port connected to the new root bridge.
Message Level Informational
Message Bridge topology change, vlan vlan-id , interface
portnum , changed state to stp-state
Explanation A Spanning Tree Protocol (STP) topology change has occurred on a port.
The vlan-id is the ID of the VLAN in which the STP topology change
occurred.
The portnum is the port number.
The stp-state is the new STP state and can be one of the following:
Syslog messages
FastIron Ethernet Switch Administration Guide 327
53-1003075-02