Brocade Multi-Service IronWare YANG Configuration Guide (Supporting R05.6.00) - Manual (Page 50)

42 Multi-Service IronWare YANG Configuration Guide
53-1003038-02
Full examples
3
!
!
!
!
end
<get> operation examples
The following example shows the RPC request and response of a <get> operation with filter for
interface statedata.
<nc:rpc xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"
xmlns:brcd="http://brocade.com/ns/netconf/config/netiron-config/"
message-id="25">
<nc:get>
<nc:filter >
<brcd:netiron-statedata>
<brcd:interface-statedata/>
</brcd:netiron-statedata>
</nc:filter>
</nc:get>
</nc:rpc>
]]>]]>
<nc:rpc-reply xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"
xmlns:brcd="http://brocade.com/ns/netconf/config/netiron-config/"
message-id="25">
<nc:data>
<netiron-statedata xmlns="http://www.brocade.com/netconf/config/netiron-config/">
<brcd:interface-statedata>
<brcd:interface>
<brcd:interface-id>management 1</brcd:interface-id>
<brcd:link-state>
<brcd:up></brcd:up>
</brcd:link-state>
<brcd:l2-state>
<brcd:forward></brcd:forward>
</brcd:l2-state>
<brcd:duplex>
<brcd:full></brcd:full>
</brcd:duplex>
<brcd:speed>1G</brcd:speed>
<brcd:tag-mode>
<brcd:yes></brcd:yes>
</brcd:tag-mode>
<brcd:priority-level>
<brcd:level0></brcd:level0>
</brcd:priority-level>
<brcd:mac-address>748e.f811.8180</brcd:mac-address>
</brcd:interface>
<brcd:interface>
<brcd:interface-id>ethernet 1/1</brcd:interface-id>
<brcd:link-state>
<brcd:down></brcd:down>
</brcd:link-state>
<brcd:l2-state>
<brcd:disabled></brcd:disabled>
</brcd:l2-state>
<brcd:duplex>
<brcd:none></brcd:none>