Brocade Multi-Service IronWare YANG Configuration Guide (Supporting R05.6.00) - Manual (Page 67)

Multi-Service IronWare YANG Configuration Guide 59
53-1003038-02
Chapter
4
MPLS Configuration
In this chapter
• Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
• MPLS configuration elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
• MPLS state elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
• Full examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Overview
This chapter describes how to configure Multiprotocol Label Switching (MPLS) using the YANG
model, and illustrates the equivalent XML and CLI.
NOTE
For the most recent YANG models, visit http://my.brocade.com .
MPLS configuration elements
Each element of the MPLS corresponds to the following:
• A YANG model description
• An XML description
• A CLI description
The following subsections compare a specific example for each MPLS configuration element.