Brocade Multi-Service IronWare YANG Configuration Guide (Supporting R05.6.00) - Manual (Page 93)

Multi-Service IronWare YANG Configuration Guide 85
53-1003038-02
Full examples
4
]]>]]>
<nc:rpc xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"
xmlns:brcd="http://brocade.com/ns/netconf/config/netiron-config/"
message-id="25">
<nc:get>
<nc:filter nc:type="subtree" >
<brcd:netiron-statedata>
<brcd:mpls-statedata/>
</brcd:netiron-statedata>
</nc:filter>
</nc:get>
</nc:rpc>
]]>]]>
<nc:rpc-reply xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"
xmlns:brcd="http://brocade.com/ns/netconf/config/netiron-config/"
message-id="25">
<nc:data>
<netiron-statedata xmlns="http://www.brocade.com/netconf/config/netiron-config/">
<brcd:mpls-statedata>
<brcd:mpls-lsp-statedata>
<brcd:name>examplelsp1</brcd:name>
<brcd:to>1.99.161.1</brcd:to>
<brcd:admin-state>
<brcd:up></brcd:up>
</brcd:admin-state>
<brcd:oper-state>
<brcd:down></brcd:down>
</brcd:oper-state>
<brcd:tunnel-intf>tnl1</brcd:tunnel-intf>
<brcd:up-dn-times>0</brcd:up-dn-times>
<brcd:retry-no>13</brcd:retry-no>
</brcd:mpls-lsp-statedata>
<brcd:mpls-lsp-statedata>
<brcd:name>examplelsp2</brcd:name>
<brcd:to>1.99.145.1</brcd:to>
<brcd:admin-state>
<brcd:up></brcd:up>
</brcd:admin-state>
<brcd:oper-state>
<brcd:down></brcd:down>
</brcd:oper-state>
<brcd:tunnel-intf>tnl2</brcd:tunnel-intf>
<brcd:up-dn-times>0</brcd:up-dn-times>
<brcd:retry-no>0</brcd:retry-no>
</brcd:mpls-lsp-statedata>
<brcd:mpls-interface-statedata>
<brcd:interface-id>ve 100</brcd:interface-id>
<brcd:admin-state>
<brcd:down></brcd:down>
</brcd:admin-state>
<brcd:oper-state>
<brcd:down></brcd:down>
</brcd:oper-state>
<brcd:maximum-bw>0</brcd:maximum-bw>
<brcd:maximum-reservable-bw>0</brcd:maximum-reservable-bw>
<brcd:admin-group-bitmap>0</brcd:admin-group-bitmap>
<brcd:per-priority-reservable-bw>
<brcd:priority-bandwidth>
<brcd:priority>0</brcd:priority>
<brcd:bandwidth>0</brcd:bandwidth>