Brocade ICX 6450-C Compact Switch Hardware Installation Guide - Manual (Page 15)

Port status LEDs (Continued) TABLE 2
LED Condition Status
PoE/PoE+(1 - 4) On/Green (right side) The port is providing PoE or PoE+ power to a
connected device.
Off (right side) The port is not providing PoE or PoE+ power.
100M/1GbE RJ45 ports(PD1/C1 -
PD2/C2, Slot 2)
Link/Act
On/ Flashing Green The port is operating at 1 Gbps. Flashing
indicates the port is transmitting and receiving
user packets at 1 Gbps.
Off A link is not established with a remote port.
100M/1GbE SFP ports(F1 - F2, Slot 3)
Link/Act
On/ Flashing Green The SFP port is operating at 1 Gbps. Flashing
indicates the port is transmitting and receiving
user packets at 1 Gbps.
Off A link is not established with a remote port.
System status LEDs
The figure below shows the location of the system status LEDs on an ICX 6450-C device.
FIGURE 6 System status LEDs on an ICX 6450-C12-PD device
1 System status LEDs
The table below lists the system status LEDs on an ICX 6450-C device and their corresponding
conditions and status.
System status LEDs TABLE 3
LED Condition Status
PWR
(Power)
Green Power source is the AC power supply and is
operating normally.
Amber Power source is the PD ports and is
operating normally.
Off Power supply off.
PD1 and PD2 Green PD port source is PoE+.
System status LEDs
Brocade ICX 6450-C Compact Switch Hardware Installation Guide 13
53-1003081-01