Wall mount installation using wall mount brackets – Brocade ICX 6450-C Compact Switch Hardware Installation Guide User Manual
Page 30
Advertising
Wall mount installation using wall mount brackets
NOTE
You need a #2 Phillips screwdriver, a hammer, and a drill for wall mount installation.
NOTE
When mounting the device on a wall, Brocade recommends that you mount the device with the port
side down.
To securely mount the ICX 6450-C device to a wall, use the rack-mount kit that can be ordered
separately from the device (Brocade Part Number: ICX6400-RMK). The rack-mount kit is not included
with the device. Brocade recommends that you wall mount the device with the port side down.
Complete the following steps to mount the device to a wall.
Wall mount installation using wall mount brackets
28
Brocade ICX 6450-C Compact Switch Hardware Installation Guide
53-1003081-01
Advertising