Brocade Fabric OS Encryption Administrator’s Guide Supporting HP Secure Key Manager (SKM) and HP Enterprise Secure Key Manager (ESKM) Environments (Supporting Fabric OS v7.2.0) User Manual
Page 103
Fabric OS Encryption Administrator’s Guide (SKM/ESKM)
83
53-1002923-01
Tape LUN statistics
2
3. Select a tape target storage device, then click LUNs.
The Target Tape LUNs dialog box displays. (Refer to
.) A list of the configured tape
LUNs is listed in the table.
FIGURE 57
Target Tape LUNs dialog box
4. Select the LUN or LUNs for which to display or clear statistics, then click Statistics.
The Tape LUN Statistics dialog box displays. (Refer to
.) The statistic results based on
the LUN or LUNs you selected are listed in the table. Tape LUN statistics are cumulative.
FIGURE 58
Tape LUN Statistics dialog box
The dialog box contains the following information:
•
LUN #: The number of the logical unit for which statics are displayed.
•
Tape Volume/Pool: The tape volume label of the currently-mounted tape, if a tape session
is currently in progress.
•
Tape Session #: The number of the ongoing tape session.
•
Uncompressed blocks: The number of uncompressed blocks written to tape.
•
Compressed blocks: The number of compressed blocks written to tape.
•
Uncompressed Bytes: The number of uncompressed bytes written to tape.