Brocade Fabric OS Encryption Administrator’s Guide Supporting HP Secure Key Manager (SKM) and HP Enterprise Secure Key Manager (ESKM) Environments (Supporting Fabric OS v7.2.0) - Manual (Page 113)

Fabric OS Encryption Administrator’s Guide (SKM/ESKM) 93
53-1002923-01
Master keys
2
FIGURE 64 Restore Master Key for Encryption Group dialog box - Restore from file
4. Choose the active or alternate master key for restoration, as appropriate.
5. Select File as the Restore From location.
6. Enter a file name, or browse to the desired location.
7. Enter the passphrase. The passphrase that was used to back up the master key must be used
to restore the master key.
8. Click OK.
Restoring a master key from a key vault
Use the following procedure to restore the master key from a key vault:
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
dialog box. (Refer to Figure 1 on page 14.)
2. Select a group from the Encryption Center Devices table, then select Group > Security from the
menu task bar.
The Encryption Group Properties dialog box displays with the Security tab selected.
3. Select Restore Master Key as the Master Key Action.
The Restore Master Key for Encryption Group dialog box displays. (Refer to Figure 65 .)