Brocade Fabric OS Encryption Administrator’s Guide Supporting HP Secure Key Manager (SKM) and HP Enterprise Secure Key Manager (ESKM) Environments (Supporting Fabric OS v7.2.0) User Manual
Page 66
46
Fabric OS Encryption Administrator’s Guide (SKM/ESKM)
53-1002923-01
Creating an encryption group
2
1. Enter the IP address or host name for the primary key vault.
2. Enter the name of the file that holds the primary key vault’s CA key certificate, or browse to the
desired location. This file can be generated from the key vault’s administrative console.
3. Enter the key vault user name.
4. Enter the password you established for the Brocade user group.
5. Re-enter the password for verification.
6. If you are using a backup key vault, enter the IP address or host name, and the name of the file
holding the backup key vault’s public key certificate in the fields provided. The same user
name and password used for the primary key vault are automatically applied to the backup
key vault. The backup address can be left blank.
7. Click Next.
The Specify Certificate Signing Request File Name dialog box displays. (Refer to
FIGURE 19
Specify Certificate Signing Request File Name dialog box
8. Enter the location of the file where you want to store the certificate information, or browse to
the desired location, then click Next.
The Specify Master Key File Name dialog box displays. (Refer to
.)