Brocade Fabric OS Encryption Administrator’s Guide Supporting HP Secure Key Manager (SKM) and HP Enterprise Secure Key Manager (ESKM) Environments (Supporting Fabric OS v7.2.0) - Manual (Page 142)

122 Fabric OS Encryption Administrator’s Guide (SKM/ESKM)
53-1002923-01
Viewing and editing encryption group properties
2
FIGURE 82 Encryption Group Properties dialog box - HA Clusters tab
The HA Clusters tab displays the includes the following information:
• Non-HA Encryption Engines table: Displays a list of encryption engines that are not configured
for high-availability clustering
• High-Availability Clusters table: A list of encryption engines that have been selected for
high-availability clustering.
• Right and l eft arrow buttons: You can select an encryption engine in the Non-HA Encryption
Engines table and click the right arrow button to add the encryption engine to the
High-Availability Clusters. (If you are creating a new HA cluster, a dialog box displays requesting
a name for the new HA cluster.)
Similarly, you can select an encryption engine in the High-Availability Clusters table and click
the left arrow button to remove it from a cluster. The encryption engine is removed from the
table and shown as available.
• Dual arrow buttons: After selecting an encryption engine in both the Non-HA Encryption
Engines table and the High-Availability Clusters table, clicking the dual arrow button swaps the
cluster members.
NOTE
Swapping engines using the dual arrow button is not the same as removing one engine and
adding another. When swapping engines, all configured targets are moved from the former
HA cluster member to the new HA cluster member. Swapping engines is useful when replacing
hardware.