Specifications, Physical specifications, Power cord specifications – Brocade Mobility RFS4000 Controller Installation Guide (Supporting software release 4.3.0.0 and later) User Manual
Page 15: Power protection, 2 specifications, Physical specifications power cord specifications, Chapter
Brocade Mobility RFS4000 Controller Installation Guide
5
53-1001933-02
Chapter
2
Specifications
In this chapter
•
•
Physical specifications
Power cord specifications
A power supply is included, however a power cord is not supplied with the switch.
Use only a correctly rated power cord certified (as appropriate) for the country of
operation
.
Power protection
•
If possible, use a circuit dedicated to data processing equipment. Commercial
electrical contractors are familiar with wiring for data processing equipment
and can help with the load balancing of these circuits.
Width
304.8mm (12.0in)
Height
44.45mm (1.75 in) 1 RU
Depth
254mm (10.0 in)
Weight
2.15 Kg (4.75 lbs)
Operating Temperature
0
°
C - 40
°
C (32
°
F - 104
°
F)
Operating Humidity
5% - 85% RH, non-condensing
Operating Altitude
10,000 ft @ 28deg C < 15% Relative Humidity
MobilityRFS4000ControllerInstallGuide.book Page 5 Friday, June 10, 2011 1:32 PM