Shallow well application, Step 6, Step 4 – Burcam 506721 CONVERTIBLE C.I. JET PUMP 3/4HP 115/230V User Manual
Page 8: Step 2, Step 3, Step 7, Step 5, Well point optional installation
Advertising
SHALLOW WELL APPLICATION
Well point optional installation
8
STEP 6
Cut poly
pipe and connect both ends.
STEP 4
Install well seal
and piping into well casing.
STEP 2
Cut poly pipe
and install the check valve.
Check valve,
close to pump.
STEP 3
Insert well
seal elbow through the seal
and attact to pipe.
STEP 7
You may install one or more sand
points to increase the supply of water.
STEP 5
Install your pump
and thread an adaptor into inlet.
Advertising