Trouble shooting guide checklist, Trouble probable cause action – Burcam 506530SS S.W. STAINLESS STEEL SPRINKLER JET PUMP 3/4HP 115/230+HANDLE User Manual

Page 10

Advertising
background image

10

TROUBLE SHOOTING GUIDE CHECKLIST

NEVER MAKE ADJUSTMENTS TO ANY ELECTRICAL APPLIANCE OR PRODUCT WITH THE POWER
CONNECTED. DON’T JUST UNSCREW THE FUSE OR TRIP THE BREAKER, REMOVE THE POWER
FROM THE RECEPTACLE.

Switch is off position
Blown fuse
Tripped breaker
Dirty pressure switch
Defective pressure switch
Defective motor

Pump not primed
Leaky suction line
Foot valve plugged
Ejector nozzle clogged
Water level below foot valve
Suction lift to great
Improper voltage

Water level below foot valve
Ejector nozzle clogged
Excessive friction in pipe
Improper voltage

Leaky suction line
Gaz in water

Turn switch to on position
Replace
Reset
Clean
Replace
Replace

Prime with clean water
Check pipe and pipe connections
Clean
Clean
Check foot valve level
Water level lower than lift capacity
Check voltage

Check foot valve level
Clean
Too small or dirty pipe
Check voltage

Check pipe and pipe connections
Check and consult factory

TROUBLE PROBABLE CAUSE ACTION

Motor does not
run.

Motor runs but
no water is
delivered.

Pump does not
deliver to full
capacity.

Air spurts from
fawcets.

TO THE END CONSUMER

If you have any problems with the product, before advising the store, where you’ve
purchased the pump, please contact us at 514 337-4415 , and ask for our sales
department, and they will be pleased to help you with any questions you might have,
concerning your installation.

Advertising