Actron CP9190 - Manual (Page 54)

Using The Scan Tool
3 – 20 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3
2. Play Back Recording.
•Press
ENTER.
✓
On GM Historic and Ford Historic
vehicles, you must select the data to
playback as an Entire Data List or
Custom Data List.
✓
The Playback has frame number
and timestamp (in seconds).
❒
Negative frames and
timestamps indicate data
recorded before trigger event.
❒
Positive frames and
timestamps indicate data
recorded after trigger event.
❒
Use
UP or DOWN arrow
keys to view recorded PID data of each frame.
❒
Use
LEFT or RIGHT arrow keys to scroll back and forth
through frames.
❒
If graphing is available for
selected PID, the “
”, icon is
located on the side of the
screen.
– Press
ENTER to view
graph.
– Press
ENTER
again to return
to Playback .
Note: Graphing is only available on 1996 and newer vehicles
equipped with an OBD II (J1962) connector.
✓
The triangle below the graph indicates the position of the frame in
the graph.
❒
Use
LEFT or RIGHT arrow keys to scroll back and forth
through graph.
ON MIL STATUS
ABS TPS(%) 100
ENGINE (RPM) 688
A/F RATIO 14:1
CALC LOAD 83.1
FRAME:0 TM 0.0

100+
ABS TPS (%) 59%
0 +
FRAME:0 TM 0.0