Actron CP9190 User Manual
Page 96
Global OBD II Diagnostics
4 – 32 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4 4
✓
On Non-CAN vehicles the Scan
Tool displays:
❒
Test data (test ID)
❒
Maximum value (MAX)
❒
Test measurements (MEAS)
❒
Minimum value (MIN)
❒
Status (STS)
❒
Measurements and
Specification values are
hexadecimal numbers (i.e.,
$1A, $FE, $11.)
❒
Module (MOD)
OR
✓
On CAN vehicles Scan Tool
displays:
❒
Test performed. The test
performed can be $## if test is
not defined. Refer to vehicle
service manual for details.
❒
Measured values and units of
measured (such as volts,
amps, and seconds).
❒
Status of monitor test data.
❒
Module ID where the monitor
test data came from.
3. Return to Select Test Menu.
•Press
BACK key.
4. Return to Special Tests Menu.
•Press
BACK key.
Non-CAN Vehicles
ID:
01
MAX:
0
MEAS:
0
MIN:
----
STS:
OK
MOD:
$10
Test $53
Data
CAN Vehicles
RICH-LN
Thresh
Module
$00
MAX:
0.6012 (V)
MEAS:
0.6012 (V)
MIN:
0.6012 (V)
Status:
OK
O2 Sensor B2S2