Davey HM Series Electric Pumps User Manual
Page 2
2
11
Prior to using this pump you must ensure that:
• The pump is installed in a safe and dry environment
• The pump enclosure has adequate drainage in the event of leakage
• Any transport plugs are removed
• The pipe-work is correctly sealed and supported
• The pump is primed correctly
• The power supply is correctly connected
• All steps have been taken for safe operation
Appropriate details for all of these items are contained in the following Installation
and Operating Instructions. Read these in their entirety before switching on this
pump. If you are uncertain as to any of these Installation and Operating Instructions
please contact your Davey dealer or the appropriate Davey office as listed on the
back of this document.
Congratulations on your purchase of a high quality, Australian built Davey
multistage pump. All components have been designed and manufactured to give
trouble free, reliable operation.
General
Applications
Pumps for clear liquids, free of abrasives in residential, agricultural, industrial, and
other applications.
In accordance with AS 3350.2.41 we are obliged to inform you that this pump is not
to be used by children or infirm persons and must not be used as a toy by children.
1.
Priming Plug
2.
Discharge Outlet
(1” BSPF)
3.
Suction Inlet (1
1
/
4
” BSPF)
4.
Pump Body
5.
Motor
Specifications
Max. service pressure:
1000kPa
Max. inlet pressure:
600kPa
Liquid temperate range:
-15 to +105
o
C
Ambient temperature:
0 to 50
o
C
Suction head:
depends on NPSH of pump
Before installing your new pump, please read all instructions carefully as failures
caused by incorrect installation or operation are not covered by the guarantee. Your
HM Electric Pump is designed to handle clean water. The pump should not be used
for any other purpose without specific referral to Davey. The use of the pump to
pump flammable, corrosive and other materials of a hazardous nature is specifically
excluded.
5
2
1
4
3