Elitegroup VX900-I2 (V1.0) - Manual (Page 15)

Chapter 2
11
VX900-I2 USER MANUAL
1 Remove a blanking plate from the system case corresponding to the slot
you are going to use.
2 Install the edge connector of the add-on card into the expansion slot.
Ensure that the edge connector is correctly seated in the slot.
3 Secure the metal bracket of the card to the system case with a screw.
1. For some add-on cards, for example graphics adapters and network adapt-
ers, you have to install drivers and software before you can begin using the
add-on card.
Follow these instructions to install an add-on card:
Please refer the following illustrations to install the add-on card:
Install the Raising Card in the PCIEX8 slot
* For reference only
Insert a Mini SATA (mSATA) card into the MPEI Slot.
Picture 1 Picture 2