Elitegroup VX900-I2 (V1.0) - Manual (Page 32)

Chapter 3
VX900-I2 USER MANUAL
28
Scroll to this item and press <Enter> to view the following screen:
SATA2
Press <Esc> to return to the main menu setting page.
Press <Esc> to return to the Standard CMOS Setup page.
Type (Auto)
Use this item to configure the type of the IDE device that you specify. If the feature
is enabled, it will enhance hard disk performance by reading or writing more data
during each transfer.
LBA/Large Mode (Auto)
Use this item to set the LAB/Large mode to enhance hard disk performance by
optimizing the area the hard disk is visited each time.
Block (Multi-Sector Transfer) (Auto)
If the feature is enabled, it will enhance hard disk performance by reading or writing
more data during each transfer.
PIO Mode (Auto)
Use this item to set the PIO mode to enhance hard disk performance by optimizing
the hard disk timing.
DMA Mode (Auto)
DMA capability allows user to improve the transfer-speed and data-integrity for
compatible IDE devices.
S.M.A.R.T. (Auto)
The S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) system is a
diagnostics technology that monitors and predicts device performance. S.M.A.R.T.
software resides on both the disk drive and the host computer.
32Bit Data Transfer (Enabled)
Use this item to set the onboard SATA-IDE channel to be disabled, IDE, or RAID.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
SATA2 :
Help Item
Select the type
of device connected
to the system.
Primary IDE Master
Device
Vendor
Size
LBA Mode
Block Mode
PIO Mode
Async DMA
Ultra DMA
S.M.A.R.T.
Type Auto
LBA/Large Mode Auto
Block (Multi-Sector Transfer Auto
PIO Mode Auto
DMA Mode Auto
S.M.A.R.T. Auto
32Bit Data Transfer Enabled
: Hard Disk
: HDS728080PLA380
: 82.3GV
: Supported
: 16Sectors
: 4
: MultiWord DMA-2
: Ultra DMA-6
: Supported
F1:General Help
: Move F10: Save and Exit +/-/PU/PD: Value Enter : Select
F9: Load Default Settings ESC: Exit