Elitegroup VX900-I2 (V1.0) - Manual (Page 33)

Chapter 3
VX900-I2 USER MANUAL
29
Quick Power on Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.
Boot Up Numlock Status (On)
This item defines if the keyboard Num Lock key is active when your system is started.
Advanced Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Setup
Help Item
Alllows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Quick Power on Self Test Enabled
Boot Up Numlock Status On
APIC Mode Enabled
1st Boot Device Removable Dev.
2nd Boot Device (CD/DVD)
3rd Boot Device HDS728080PLA380
Hard Disk Drives Press Enter
CD/DVD Drives Press Enter
Boot Other Device Yes
Video Pass Beep Disabled
APIC Mode (Enabled)
This item allows you to enable or disable the APIC (Advanced Programmable Inter-
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for systems,
allowing support for up to 60 processors.
1st/2nd/3rd Boot Device (Removable Dev./(CD/DVD)/HDS728080PLA380)
Use these items to determine the device order the computer used to look for an
operating system to load at start-up time. The devices showed here will be different
depending on the exact devices installed on your motherboard.
F1:General Help
: Move F10: Save and Exit +/-/PU/PD: Value Enter : Select
F9: Load Default Settings ESC: Exit