Elitegroup VX900-I2 (V1.0) - Manual (Page 40)

Chapter 3
VX900-I2 USER MANUAL
36
System Component Characteristics
These items display the monitoring of the overall inboard hardware health events,
such as System & CPU temperature, CPU & DIMM voltage...etc.
• CPU Temperature
• System Temperature
• CPU Fan Speed
• CPU Vcore
• VDIMM
Press <Esc> to return to the main menu setting page.
SMART Fan start TEMP. (°C) (32)
This item is used to set the start temperature of the smart fan.
CPU DeltaT (+3)
This item specifies the range that controls CPU temperature and keeps it from
going so high or so low when smart fan works.
SMART Fan Slope PWM value (4 PWM value/°C)
This item is used to set the Slope Select PWM of the smart fan.
Warning Temperature (Disabled)
This item enables or disables the warning temperature.
Shutdown Temperature (Disabled)
Enable you to set the maximum temperature the system can reach before powering
down.
Press <Esc> to return to the PC Health Status page.
CPU FAN Full Limit Temp (57°C)
This item shows the limit temperature when the smart fan starts to run at full
speed.