Elitegroup H61H2-M19 (V1.0) - Manual (Page 39)

Chapter 3
H61H2-M19 USER MANUAL
35
PC Health Status
On motherboards support hardware monitoring, this item lets you monitor the
parameters for critical voltages, temperatures and fan speeds.
Main Advanced Chipset M.I.B III Boot Security Exit
System Temperature : 25 O C
CPU Fan Speed : 1896 RPM
System Fan Speed : 0 RPM
CPU Voltage : 1.032 V
AXG Voltage : 0.468 V
DIMM Voltage : 1.560 V
+5V : 4.980 V
+12V : 12.096 V
Version 2.15.1229. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
-=- PECI Mode -=-
Offset to TCC Activation Temp. : -48
F1:General Help
+/- : Change Opt.
Enter : Select


:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Smart Fan Function

PC Health Status
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1229. Copyright (C) 2012 American Megatrends, Inc.
CPU Smart Fan Control [Enabled]
Smart Fan Mode [Normal]
Smart Fan start PWM value 180
Smart Fan start PWM TEMP(-) 30
DeltaT 3
Smart Fan Slope PWM value 10 PWM value / unit
CPU Fan Full Speed Offset(-) 23
Main Advanced Chipset M.I.B III Boot Security Exit
Scroll to this item and press <Enter> to view the following screen:
Smart Fan Function

F1:General Help
+/- : Change Opt.
Enter : Select

:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
CPU Smart Fan Control (Enabled)
This item allows you to enable or disable the control of the CPU fan speed by
changing the fan voltage.
Smart Fan Mode (Normal)
This item allows you to select the fan mode (Normal, Quiet, Silent, or Manual) for a
better operation environment. If you choose Normal mode, the fan speed will be
auto adjusted depending on the CPU temperature. If you choose Quiet mode, the
fan speed will be auto minimized for quiet environment. If you choose Silent mode,
the fan speed will be auto restricted to make system more quietly. If you choose
Manual mode, the fan speed will be adjust depending on users’ parameters.
