Elitegroup H61H2-M19 (V1.0) - Manual (Page 75)

Chapter 3
H61H2-M19 USER MANUAL
71
This page enables you to set setup administrator password and user password.
Security Menu
Administrator Password Status (Not Install)
This item shows administrator password installed or not.
User Password Status (Not Install)
This item shows user password installed or not.
System Mode state (Setup)
This item shows system mode setup or not.
Secure Boot state (Disabled)
This item allows you to enable or disable the secure boot state.
Secure Boot (Enabled)
This item is used to control the secure boot flow, it is possible only if system runs in
User Mode.
Version 2.15.1229. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Set Administrator Password
Main Advanced Chipset M.I.B III Boot Security Exit

F1:General Help
+/- : Change Opt.
Enter : Select

:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Administrator Password Status Not Install
User Password Status Not Install
Administrator Password
System Mode state Setup
Secure Boot state Disabled
Secure Boot [Enabled]
Secure Boot Mode [Custom]
Image Execution Policy
Key Management


Secure Boot Mode (Custom) *
This item is used to select secure boot mode, when you select standard mode, se-
cure boot policy is fixed; when you select custom mode, the image execution policy
and secure boot key databases are changeable.
Image Execution Policy *
Sroll to this item and press <Enter> to view the sub menu.
Key Management *
Sroll to this item and press <Enter> to view the sub menu.
These items will be hidden if the Secure Boot is set to be Disabled.