Elitegroup H61H2-M19 (V1.0) - Manual (Page 57)

Chapter 3
H61H2-M19 USER MANUAL
53
Press <Esc> to return to the Advanced Menu page.
Parallel Port Configuration
Scroll to this item and press <Enter> to view the following screen:
Parallel Port (Enabled)
This item allows you to enable or disable parallel port.
Device Settings (IO=378h; IRQ=5)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Parallel Port Configuration
Parallel Port [Enabled]
Device Settings IO=378h; IRQ=5;
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1229. Copyright (C) 2012 American Megatrends, Inc.
Enable or Disable Parallel Port
(LPT/LPTE)
Change Settings [Auto]
Device Mode [Standard Parallel Port Mode]
Main Advanced Chipset M.I.B III Boot Security Exit
F1:General Help
+/- : Change Opt.
Enter : Select


:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Press <Esc> to return to the Super IO Configuration page.
Device Mode (Standard Parallel Port Mode)
Use this item to select the parallel port mode: SPP/EPP/ECP/EPP+ECP.