FallTech 83663 - Manual (Page 20)

20
Models 7202, 7366, 736616, 736624, 73663, 7366TD, 73662D
Material Tensile Strength Gate Strength
Snap hook Alloy Steel 5,000 lbs. 220 lbs gate face, 350 lbs side-load
Rebar hook Alloy Steel 5,000 lbs. 220 lbs gate face, 350 lbs side-load
D-ring/O-ring Alloy Steel 5,000 lbs. N/A
Webbing Polyester 8,000 lbs. N/A
Meets the requirements of OSHA 1926.502 and ANSI/ASSE A10.32-2004
Maximum Capacity – single user, 310 lbs.
Models 8202, 8366, 836616, 836624, 83663, 8366TD, 83662D
Material Tensile Strength Gate Strength
Snap hook Alloy Steel 5,000 lbs. 3,600 lbs. gate face and side-load
Rebar hook Alloy Steel 5,000 lbs. 3,600 lbs. gate face and side-load
D-ring/O-ring Alloy Steel 5,000 lbs. N/A
Webbing Polyester 8,000 lbs. N/A
Meets the requirements of OSHA 1926.502 and ANSI/ASSE Z359.1-2007
Maximum Capacity – single user, 310 lbs.
Models 7366L and 8366L
Material Tensile Strength Gate Strength
D-ring/O-ring Alloy Steel 5,000 lbs. N/A
Web Loop Polyester 5,000 lbs. N/A
Webbing Polyester 8,000 lbs. N/A
Meets the requirements of OSHA 1926.502 and ANSI/ASSE Z359.1-2007
Maximum Capacity – single user, 310 lbs.
10.3: Labels and Markings
The labels shown below must be present on the product and must be legible. If it is not,
remove the product from service. The labels are located inside the black polyester label cover on
the webbing leg of the product.