FallTech DuraTech 10’ Self Retracting Device - Manual

MSRD06
032714
User Instruction Manual
DuraTech® 10’ Self Retracting Device
This
manual is intended to meet the Manufacturer's Instructions as required by ANSI Z359 and should be used as part of an
employee
training program as required by OSHA.
WARNING
This product is part of a personal fall arrest, restraint, work positioning, suspension, or rescue system. A Personal Fall Arrest
System (PFAS) is typically composed of an anchorage and a Full Body Harness (FBH), with a connecting device, i.e., a Shock
Absorbing Lanyard (SAL), or a Self‐Retracting Device (SRD), attached to the dorsal D‐ring of the FBH.
These instructions must be provided to the worker of this equipment. The worker must read and understand the
manufacturer's instructions for each component or part of the complete system. Manufacturer's instructions must be
followed for proper use, care, and maintenance of this product. These instructions must be retained and be kept available
for the worker’s reference at all times. Alterations or misuse of this product, or failure to follow instructions, may result in
serious injury or death.
A Fall Protection Plan must be on file and available for review by all workers. It is the responsibility of the worker and the
purchaser of this equipment to assure that workers of this equipment are properly trained in its use, maintenance, and
storage. Training must be repeated at regular intervals. Training must not subject the trainee to fall hazards.
Consult
a doctor if there is reason to doubt your fitness to safely absorb the shock of a fall event. Age and fitness seriously
affect
a worker’s ability to withstand falls. Pregnant women or minors must not use this equipment.
NOTE: For
more information consult ANSI Z359
FallTech
1306 South Alameda Street
Compton, CA 90221, USA
1‐800‐719‐4619
1‐323‐752‐0066
www.FallTech .com
©2014