FallTech Web SRL’s - Manual (Page 15)

29
Section 10: Specifications
This section contains important information regarding the
performance and construction of this product. Pease read and be
familiar with this and all information contained in this instruction manual.
10.1: Mandatory Disclosures
This instruction manual addresses foreseeable hazards, uses and
applications. If you have questions about your application that are not
addressed in this document, contact FallTech for additional guidance.
It is the responsibility of the employer/issuer of this equipment to
ensure that it is used in a manner consistent with these instructions.
Failure to do so could result in series injury or death. For further reading
and additional information, see Section 10.4 for a listing of relevant
standards with which you should be familiar.
10.2: Performance Specifications
FallTech Web Retractors
Model #s: 7262, 72624, 7263, 8262
Component Material Rating
Housing Alloy Steel 3,600 lbs
Drum ABS Plastic n/a
Main Shaft Alloy Steel 3,400 lbs
Pawls/Ratchet Alloy Steel n/a
Webbing Polyester 5,000 lbs
Attachment Connector(s) Chro-Moly Alloy Steel 5,000 lbs
Overall static strength: > 3,000 lbs
* Arrest Forces: < 900 lbs
* Deceleration Distance: < 24”
Maximum Capacity: 310 lbs
* When tested in accordance with ANSI Z359.1-2007
FallTech Web SRL’s
Model #s: 7270WR, 7271WR
Component Material Rating
Housing Alloy Steel 3,000 lbs
Drum ABS Plastic n/a
Main Shaft Alloy Steel 3,000 lbs
Pawls/Ratchet Alloy Steel n/a
Webbing Polyester 5,000 lbs
Attachment Connector(s) Chro-Moly Alloy Steel 5,000 lbs
Overall static strength: > 3,000 lbs
* Arrest Forces: < 900 lbs
* Deceleration Distance: < 24”
Maximum Capacity: 310 lbs
* When tested in accordance with ANSI Z359.1-2007
30
FallTech Web SRL’s
Model #s: 7270KV
Component Material Rating
Housing Alloy Steel 3,000 lbs
Drum Alloy Steel n/a
Main Shaft Alloy Steel 3,000 lbs
Pawls/Ratchet Alloy Steel n/a
Webbing Kevlar® 5,000 lbs
Attachment Connector(s) Chro-Moly Alloy Steel 5,000 lbs
Overall static strength: > 3,000 lbs
* Arrest Forces: < 900 lbs
* Deceleration Distance: < 24”
Maximum Capacity: 310 lbs
* When tested in accordance with ANSI Z359.1-2007
FallTech Contractor Web SRL’s
Model #s: 7276WR
Component Material Rating
Housing Nylon 6/6 over Alloy Steel 3,000 lbs
Drum Aluminum n/a
Main Shaft Alloy Steel 3,000 lbs
Pawls/Ratchet Alloy Steel n/a
Webbing Dyneema® 4,500 lbs
Attachment Connector(s) Chro-Moly Alloy Steel 5,000 lbs
Overall static strength: > 3,000 lbs
* Arrest Forces: < 900 lbs
* Deceleration Distance: < 24”
Maximum Capacity: 310 lbs
* When tested in accordance with ANSI Z359.1-2007
10.3: Labels and Markings
The labels shown below must be present on the product and must be
legible. If labels are not present and legible, remove the product from
service.