FallTech Web SRL’s - Manual (Page 2)

3
Table of Contents
Section 1: Warnings and Advisories
Section 2: Fall Protection Basics – ABCD’s
2.1: Anchorage
2.2: Body wear
2.3: Connectors/Connecting devices
2.4: Deceleration devices
2.5: Fall Arrest
2.6: Fall Restraint
2.7: Work Positioning
2.8: Free-fall
2.9: Clear-fall
2.10: Swing-fall
Section 3: Use and Limitations
3.1: General Guidelines
3.2: Approved applications
3.3: Restricted Applications
3.4: Installation and use
Section 4: Product Selection
Section 5: Anchorage Considerations
Section 6: Employer and User Training
6.1: Special notes for the employer
6.2: User training
Section 7: Fall Protection Plan
7.1: The fall protection plan
7.2: Suspension trauma
7.3: Rescue plan
Section 8: Product Inspection
8.1: Issuing
8.2: Daily/Incidental use
8.3: Mandatory semi-annual inspection
Section 9: Maintenance and Storage
Section 10: Specifications
10.1: Mandatory disclosures
10.2: Performance specifications
10.3: Labels and markings
10.4: Standards and references
4
Section 1: Warnings and Advisories
This product is to be used as a part of a personal fall arrest system,
and should be used only with compatible components. Please see
Advisory #3 in this section for further details. Failure to use
compatible components can result in a failure of the system to
perform as intended, which may result in serious injury or death.
Throughout the OSHA regulations for safety and health, there are
references to Competent Persons and Qualified Persons. ANSI
Z359.0-2007 goes on to further define the roles and qualifications of
these individuals; as well as Authorized Persons, and their
importance in the workplace. These terms are also used in these
instructions. Below is a brief description of the part these
individuals play in the employment of fall protection equipment:
Authorized Person - a person who is exposed to fall hazards during
the course of their work. This individual requires formal training in
the use of personal fall protection equipment and systems.
Competent Person – a trained and experienced person who is
designated to supervise, implement and monitor an employer’s
managed fall protection program. This individual is capable of
identifying and addressing fall hazards and is authorized to make
decisions and take corrective action in the workplace.
Qualified Person – a person possessing a degree or professional
certificate and having extensive training, knowledge and experience
with fall protection and who is capable of designing and specifying
fall protection equipment and systems to address fall hazards.
Please read these instructions and be sure that you understand
them prior to utilizing this equipment. Also be sure to read the
instructions included with other components which are being
utilized in your Personal Fall Arrest System (Harnesses,
connectors, anchorage connectors, etc.). Failure to understand and
comply with manufacturer’s instructions may result in serious
injury or death. IF YOU DO NOT UNDERSTAND ANY PART OF
THESE INSTRUCTIONS, PLEASE HAVE THEM EXPLAINED TO YOU
BY A COMPETENT PERSON.
This product is to be used as part of a complete fall arrest system in
accordance with industry-recognized best-practices and your
employer’s fall protection plan, as required by the Occupational
Health and Safety Administration. Be aware of your employer’s fall
protection plan and rescue plan. Be aware of the specific fall