Maintenance, Warranty, Maintenance and warranty – Hired-Hand Super-Savers (Forced Air Heaters) XL: SS-225-XL User Manual

Page 5

Advertising
background image

4801-5101

Rev

6-09

Page

5

of

26

Super Saver XL CE Heater

3. Maintenance And Warranty

MAINTENANCE

1. This appliance is in compliance with EN 12669 and must be commissioned after servicing.

A qualified installer is required to install, commission, and adjust appliance.

2.

The appliance area should be kept clear & free from combustible materials, gasoline and other
flammable vapors, and liquids.

3.

The flow of combustion and ventilation air must not be obstructed.

4.

Your Super Saver XL Heater should be inspected before each use, and at least annually by a
qualified service person.

5.

The hose should be visually inspected prior to each use of the heater. If it is evident there is
excessive abrasion or wear or the hose is cut, it must be replaced prior to the heater being put into
operation. The replacement hose assembly shall be that specified by the manufacturer. (See parts
list).

6.

Inspect heater and gas connections periodically for gas leaks with an approved gas leak testing
solution (soap and water work well).

7.

Keep heater clean at all times.

A.

Open doors and blow out dust with high pressure air hose. Be sure interior of
burner and flared end are kept clean.

B.

Burner orifice and hot surface ignition assembly must be kept clean and free of
carbon build-up.

C.

Check blower wheel regularly for dust accumulation and clean periodically for
maximum airflow.

D.

Thermostat coils must be kept clean to assure proper temperature control.

E.

Igniter must be cool before wash down. Do not operate heater for one hour
following wash-down.

WARRANTY

Your Super-Saver XL Heater has been manufactured with the finest materials and components
available, and is backed by a one-year warranty against electrical and mechanical defects in
material and workmanship. If this heater fails to operate during this period, return it intact and
prepaid to Hired-Hand, Inc., 1733 Co Rd 68, Bremen, AL 35033 for repair or replacement
without charge at the manufacturer’s option.

Damage by accident or abuse is not covered by this warranty.

This warranty gives you specific legal rights.

You may also have other rights which vary by location.

Warrantor:

Hired-Hand Mfg., Inc. Bremen, Alabama 35033 USA

Advertising