Agilent Technologies 16700 - Manual (Page 68)

68
Post-Processing and Analysis Tool Sets
Tool Development Kit
Custom Tool Example, Added Text in
Trace
This example shows how a custom
tool can convert data to text to pres-
ent information in an easy-to-under-
stand form.
The original trace comes from a
control unit in an automobile.
Embedded in the data is information
about the engine and transmission.
When MODE = 0, DATA represents
engine information, including RPM,
fuel level, fuel to air ratio, and mani-
fold pressure. When MODE = 1,
DATA represents transmission infor-
mation, including gear position and
temperature.
This custom tool allows the user to
specify Fahrenheit or Centigrade for
the engine temperature data.
Output of Custom Tool
Original Trace
Parameter Interface of Custom Tool Figure 5.21.