Agilent Technologies 16700 - Manual (Page 94)

94
State/Timing Modules Specifications and
Characteristics
Agilent Technologies 16715A, 16716A, 16717A, 16740A, 16741A, 16742A, 16750A,
16751A, 16752A Supplemental Specifications* and Characteristics (continued)
Timing Mode (continued) 16715A, 16716A, 16717A 16740A, 16741A, 16742A
16750A, 16751A, 16752A
Maximum trigger sequence speed 167 MHz 200 MHz
Maximum trigger sequence levels 16 16
Trigger sequence level branching 4 way arbitrary “IF/THEN/ELSE” branching 4 way arbitrary “IF/THEN/ELSE” branching
Trigger position Start, center, end, or user defined Start, center, end, or user defined
Trigger resources 16 Patterns evaluated as =, ≠, >, <, ≥, ≤ 16 Patterns evaluated as =, ≠, >, <, ≥, ≤
15 Ranges evaluated as in range, not in range 15 Ranges evaluated as in range, not in range
2 Edge/glitch 2 Edge/glitch
(2 Timers per module) -1 (2 Timers per module) -1
2 Global counters 2 Global counters
1 Occurrence counter per sequence level 1 Occurrence counter per sequence level
4 Flags 4 Flags
Trigger resource conditions Arbitrary Boolean combinations Arbitrary Boolean combinations
Trigger actions Goto Goto
Trigger and fill memory Trigger and fill memory
Trigger and goto Trigger and goto
Timer start/stop/pause/resume Timer start/stop/pause/resume
Global counter increment/reset Global counter increment/reset
Occurrence counter reset Occurrence counter reset
Flag set/clear Flag set/clear
Maximum global counter 16,777,215 16,777,215
Maximum occurrence counter 16,777,215 16,777,215
Maximum pattern/range width 32 bits 32 bits
Timer value range 100 ns to 5497 seconds 100 ns to 5497 seconds
Timer resolution 5 ns 5 ns
Timer accuracy ±10 ns + .01% ±10 ns + .01%
Greater than duration 6 ns to 100 ms in 6 ns increments 6 ns to 100 ms in 6 ns increments
Less than duration 12 ns to 100 ms in 6 ns increments 12 ns to 100 ms in 6 ns increments
Timer reset latency 70 ns 70 ns
Data in to trigger out (BNC port) 150 ns, typical 150 ns, typical
Flag set/reset to evaluation 110 ns, typical 110 ns, typical
* All specifications noted by an asterisk are the performance standards against which the product is tested.