Seed Hawk Raven 2010 - Manual (Page 19)

2
Manual No. 016-3001-003 9
Installation, Start Up & Registration
2.
Match up mounting posts on the back of the Viper Pro console with the recessed holes in the mounting
bracket.
When assembled, the smaller flange of the mounting bracket should be centered with the console and
slightly behind the upper flange.
3.
Use the eight flat head screws to fasten the mounting bracket to the Viper Pro console.
4.
Match up the two mounting posts on the back of the switch box with the smaller flange of the mounting
bracket.
5.
Use two phillips head screws to mount the switch box to the mounting bracket.
6.
The remaining clamps and four hex bolts will be used to secure the Viper Pro console and switch box to the
selected mounting post within the vehicle cab.
Mounting
Posts
Flat Head
Screws
Mounting
Posts CANbus
Connector Logic Power
Connector
Speed
Connector