Can profile – Seed Hawk Raven 2010 User Manual
Page 65
3
Manual No. 016-3001-003
55
CAN (Controller Area Network) Setup
8.
Press OK. Viper Pro saves the changes.
Note:
Field volume, field area, and tank volume can be reset while in a job. Total volume and total area
can only be reset while a job is not in progress.
CAN Profile
A CAN profile stores the various settings for the CANbus system (i.e. speed, meter, and rate cals) stored on
the CAN nodes. Create a CAN profile to quickly restore settings for various types of product or seed being
applied.
CAN profiles store the following settings and values for each product on the CANbus:
Note:
Some of these settings are only applicable to optional liquid products on the CANbus.
To create a CAN profile:
1.
Touch the Product Control area on the main screen.
2.
Touch the CAN Profile button at the bottom of the CAN Controller Status screen.
•
Dual Flow %
•
Agitator
•
Pump Cal
•
Off Rate %
•
Ratio Rate
•
Min PW
•
Low Tank
•
Rate Cal
•
Max PW
•
Low Limit
•
Rate Bump (+/-)
•
Preset PW
•
Tank Volume
•
Meter Cal
•
PW Frequency
•
Flow/Shaft Alarm
•
Product Density
•
Ratio Rate Cal
•
Vac/Bin Alarm
•
Spreader Constant
•
Valve Delay
•
Decimal Shift
•
Valve Cal 1
•
PWM
•
Zero Shutoff
•
Valve Cal 2
•
Max PSI
•
Display Smoothing
•
Fan Cal
•
Cal Weight