Spectra Precision FAST Survey Reference Manual - Manual (Page 302)

p300
Click Find and the FAST Survey zooms to the selected point at the entered scale.
Scale Bar (SB):
This toggles the visibility of scale bar on or off. The scale bar is normally shown at the bottom of the MAP screen.
List (LI):
Applying to linework entities only, this lists the layer, 2D or 3D status, Closed or Open status, perimeter (length), and
area or projected area (if not closed). If the polyline is 3D, the coordinates of the polyline are shown:
DRAW
The Draw menu is found next to the View menu in MAP view. Below you will find each feature described.