Spectra Precision FAST Survey Reference Manual - Manual (Page 375)

p373
Joystick speeds are 1 to 6 (for arrow key response turning gun). For reference 6 is approximately 6 degrees per arrow
press. Search types are Sight (field of view of gun, or 1 degree, 30 minutes or 10 meters at 100 meters), H Wide, V
Wide and HV Wide. The wide views are 6 times field of view. Auto Search before Read finds the prism center exactly
before taking a measurement (useful in Set Collection, for example, and in Stakeout). Run Remotely sets the left and
right turning of the gun, referenced from the pole, and not from the instrument. This is distinct from left and right
referencing for stakeout which refers to movement of the rod. For the Sokkia instruments with RMC search device,
there are 2 buttons in the joystick screen for RC Search: “RC Left” and “RC Right”. Left and right will be determined
by the Run Remotely setting.
Total Station (Sokkia Robotic)
The following information describes the various options available for the Sokkia Robotic total stations.
The instrument “Measure” screen should be shown on the total station in order to work with FAST Survey. Commands
will not be accepted, for example, if you were in the “Config” screen.
Note that baud rates on the Sokkia robotic must be set to 9600. The Settings options for the Sokkia robotic are shown
below:
Joystick speeds are 1 to 6 (for arrow key response turning gun). For reference 6 is approximately 6 degrees per arrow
press. Search types are Sight (field of view of gun, or 1 degree, 30 minutes or 10 meters at 100 meters), H Wide, V
Wide and HV Wide. The wide views are 6 times field of view. Auto Search before Read finds the prism center exactly