Triton 8100 User/Installation Manual - Manual (Page 139)

A-27
I
NSTALLATION
P
ROCEDURES
2. Secure the assemblies together using the four (4) nuts provided with a 7/
16" nutdriver or equivalent.
Nut
3. Pivot the slide rail assemblies back
and secure/tighten all screws
previously removed/loosened.
4. Route the ATM power and phone
line cables through the cabinet
access hole into the plinth
assembly. Pull the cables out
through the rear access hole of the
plinth.
Plinth
(side view of
mounting screws)
ATM
cabinet
5. Reinstall the dispenser tray into the slide rail assemblies.
The next procedures describe installing the TDM-50 dispensing mechanism.
Suggestion
Secure the two cables together
using a ty wrap, rubber band, etc.
It will be easier to “grab” the power
cable from the plinth’s rear access
hole and both cables will come
out together.
Route cables