Triton 8100 User/Installation Manual - Manual (Page 43)

25
M
ANAGEMENT
F
UNCTIONS
C
ONFIGURE
P
ROCESSORS
A
CCESS
I
NSTRUCTIONS
:
1. From the M
AIN
M
ENU
screen, se-
lect C
ONFIGURE
P
ROCESSORS
.
2. From the C
ONFIGURE
P
ROCES
-
SORS
screen, select option (1),
(2), (3), or (4).
** Important**
Option (1) MUST be configured. It is
the default processor for standard ATM
transactions.
D
ESCRIPTION
:
The following options will be available
from the C
ONFIGURE
P
ROCESSORS
screen:
0. Processor Name. Allows entry
for the name of the specified
processor (Ex: CALYPSO)
1. Terminal ID. Allows entry of
the terminal ID assigned by the
host processor.
2. Key Management. Allows en-
try of the PIN Master key(s) as-
signed by the host processor.
Option 0 - Processor Name
3. Communication Type. Allows
user to toggle between the com-
munication type the terminal is
using (Dial-up, TCP/IP). Note:
Model 8100 detects the commu-
nication type installed and will
not allow user to change
(toggle).
4. Communication Numbers. Al-
lows entry of the host proces-
sors primary and backup (if
needed) phone numbers or the
Host TCP/IP Addresses if run-
ning TCP/IP communication
type.