Triton 8100 User/Installation Manual - Manual (Page 71)

53
M
ANAGEMENT
F
UNCTIONS
A
CCESS
I
NSTRUCTIONS
:
1. From the M
AIN
M
ENU
screen, se-
lect C
ONFIGURE
T
ERMINAL
.
2. From the C
ONFIGURE
T
ERMINAL
screen, select ATM M
ONITOR
-
ING
.
3. From the ATM M
ONITORING
screen, select T
RITON
C
ONNECT
.
4. From the T
RITON
C
ONNECT
screen, select TCP/IP C
ONFIGU
-
RATION
.
D
ESCRIPTION
:
The T
RITON
C
ONNECT
function allows
the terminal operator to set up
parameters that control D
IAL
-U
P
and
TCP/IP communications between the
ATM and Triton Connect PC-based
software to remotely manage your
Triton Systems ATMs. The following
TCP/IP parameters are accessed
through this function and described on
the following pages:
$ $ $ $ $
Host Numbers
$ $ $ $ $
Alarm Numbers
$ $ $ $ $
TCP/IP Configuration
** Important **
If using, turn Triton Connect <ON>
after entering the Configuration
parameters.
Note: Comms Type Option
You must have the External Ethernet
device installed. For Model 8100/9100
ATMs, this function detects the
communication type installed (Dialup
or TCP/IP) and will not allow user to
change (toggle).
T
RITON
C
ONNECT
TCP/IP C
ONFIGURATION