Triton 8100 User/Installation Manual - Manual (Page 72)

54
M
ODEL
8100 U
SER
/ I
NSTALLATION
M
ANUAL
T
RITON
C
ONNECT
H
OST
N
UMBERS
D
ESCRIPTION
:
The H
OST
N
UMBERS
are provided by
your Processor/Host Network
administrator. If you are using TCP/IP
as your communication type, you will
need to enter H
OST
TCP/IP A
DDRESSES
.
The first part of the address consists
of a sequence of four groups of
numbers. Each group can be up to three
digits long, and each group is separated
by a period (dot character), as in this
example: 123.3.01.99 The second part
of the address is a P
ORT
N
UMBER
,
consisting of four (4) digits or less,
separated from the first part by a comma
(“,”) character, as in this example:
123.3.01.99,9043.
Follow these steps to initially enter or
change the P
RIMARY
H
OST
N
UMBER
(A
DDRESS
):
$
Select <Change> to blank the
current entry, if necessary.
$
Enter the first group of numbers in
the TCP/IP Address using the main
keypad keys.
$
Enter a ‘dot’ character by pressing the <Control> key, then the <0> key
Twice to select the period’, then the <Right Arrow>key to lock it in.
$
Repeat Steps 2 and 3 for the second and third group of numbers in the TCP/
IP Address.
$
Enter the fourth group of numbers in the TCP/IP Address.
$
Enter the comma (“,”) character by pressing the <Control> key, then the
<0> key Once to select the comma. Press the <Right Arrow> key to
lock it in.
$
Enter the P
ORT
N
UMBER
. Select <Enter> to save the Primary TCP/IP
Address entry or <Cancel> to discard the changes. Repeat steps for B
ACKUP
H
OST
N
UMBER
(A
DDRESS
) entry.