Specific safety rules for rotary tool kit – WEN 2307 101 Piece Rotary Tool Kit User Manual
Page 6
6
Use only three (3) wire extension cords that have three (3) prong grounding plugs, and three (3) pole
receptacles that accept the tool‟s plug.
AMERICAN WIRE GAUGE RATING CHART
EXTENSION CORD
25
50
75
100
125
150
175
200
LENGTH (FEET)
AMPS
AWG
0 to 10.0
18
18
16
16
14
14
12
12
10.1 to 13.0
16
16
14
14
14
12
12
12
13.1 to 15
14
12
12
12
12
12
12
NA
15 to 18
14
12
12
12
12
12
NA
NA
Class II construction double insulated. This product must not be connected to earth.
SPECIFIC SAFETY RULES FOR ROTARY TOOL KIT
1. Check the work piece for any cracks, knots, nails or other obstructions before commencing
operation.
2. Never press the locking pin when the rotary tool is running.
3. Do not cut any size work piece that is beyond the tool‟s capacity.
4. Always grip the tool firmly.
5. Always secure the work piece wherever possible.
6. Always use safety spectacles, a face mask and hearing protection.
7. Ensure the tool is clear of the work piece before turning on.
8. Never touch the moving parts by hand.
9. Check the position of power cables when drilling into walls or floors.
10. Do not remove the attachment from the tool until it has completely stopped.
11. Do not touch the attachment after operation, it will be very hot. Allow it to cool down before
removing it.
12. Do not operate the tool in wet or damp conditions.
13. Do not use the tool if
: The on/off switch is faulty.
: The plug or cable is damaged.
: There is excessive sparking through the brush or spark bridges in the
collector.
: Smoke or bad odours is produced, caused by burnt insulating
materials.