WEN 2301 9.6 Volt Cordless Rotary Tool Kit - Manual (Page 8)

8
General Instructions For All Power Tools
• Do not remove jammed cut-off pieces until tool rotation has stopped .
• Never start the tool when the accessory is in contact with the work piece .
• Never touch the rotating portion of the tool or other moving parts during use .
• Before changing the setup, removing covers, guards or blades, unplug the tool
and remove the switch key .
• Always turn off tool before disconnecting it to avoid accidental starting when
reconnecting to a power source .
DO NOT OPERATE THIS TOOL WHILE UNDER THE INFLUENCE OF DRUGS,
ALCOHOL OR ANy MEDICATION THAT MAy IMPAIR yOUR JUDGMENT OR
CONTROL!
• Stay alert and exercise control . Watch what you are doing and use common
sense . DO NOT operate tool when you are tired . DO NOT RUSH!
• Make sure work area has ample lighting to see the work and that no obstruc-
tions will interfere with safe operation BEFORE performing any work using this
tool .
• Save these instructions . Refer to them frequently and use them to instruct
other users . If you loan someone this tool, loan them these instructions also .
• Don’t abuse cord . Never carry tool by the cord or yank it to disconnect from
receptacle . Keep cord from heat, oil, and sharp edges .
WARNING: when servicing use only identical WEN ® replacement
parts . Use of any other parts may create a hazard or cause
product damage .