WEN 2301 9.6 Volt Cordless Rotary Tool Kit - Manual (Page 9)

9
Specific Instructions For The Cordless Rotary Tool
SAVE THESE INSTRUCTIONS!
I. Safety Instructions for battery Charger
• Before using charger, read all instructions and cautionary markings on
(1) charger, (2) battery pack, and (3) product using battery pack .
• DANGER: 120 volts present at charging terminal . Do not probe with conductive
objects . Danger of electrical shock or electrocution .
• DANGER: If battery pack case is cracked or damaged, do not insert into
charger . Danger of electric shock or electrocution .
• The charger and battery pack are designed to work together . Do not attempt to
charge the battery pack with any other charger .
• Do not expose charger to rain, sleet or snow . Do not allow any liquid to get
inside of charger . Electric shock may result .
• Do not immerse charger in water or any other liquid .
• Pull the plug from the power outlet rather than yanking on the cord . This will
reduce the risk of damage to the electrical plug and cord .
• Do not operate charger with damaged cord or plug; have them replaced by an
authorized repair shop before using .
• Do not operate charger if it has been dropped, received a sharp blow or is
damaged in any way . Have the unit checked by an authorized repair center .
• Do not block ventilation vents located on top of the charger by placing an object
on the vents . Do not place the charger on a soft surface that may block the
ventilation vents located on the bottom of the unit . Place the charger away from
any heat source .
• Unplug the charger before attempting any cleaning . This will reduce the risk of
electrical shock .
• The charger operates on standard household current (120Volts) . Do not attempt
to use it on any other voltage .