Avigilon View - Manual (Page 51)

Managing Rialto™ Analytic Appliances
Editing Analytic Appliance Connections
You can edit the IP address or Network name, port numbers, and stream type for an analytic appliance.
NOTE: Editing a connection for the analytic appliance affects all attached sub-cameras.
1. Select the analytic appliance in the camera tree.
2. Right-click on the analytic appliance and select Edit Connection....
3. Make your changes and click OK.
Renaming an Analytic Appliance or Camera
You can rename an analytic appliance or any of its attached sub-cameras.
1. Right-click the analytic appliance or camera you want to rename and select Rename.
2. Enter a new name for the analytic appliance or camera.
3. Press Enter to accept the new name.
Filtering IP Address Communication
You can control what IP addresses can communicate with an analytic appliance.
1. Right-click a camera in the camera tree and select Device Settings...
2. In the Configure Device window, click Network.
Managing Rialto™ Analytic Appliances 51